godzilla Posted April 16, 2008 Report Share Posted April 16, 2008 Hi guys, i am going to remove the engine from my 05 sy250 to put new rings in. has anyone got any advice before i blunder in? Quote Link to comment Share on other sites More sharing options...
tombo46 Posted April 16, 2008 Report Share Posted April 16, 2008 Does the whole engine have to be removed?? is it possible to slide the cylinder off or does it hit the frame? Tom Quote Link to comment Share on other sites More sharing options...
godzilla Posted April 16, 2008 Author Report Share Posted April 16, 2008 It hits thae frame Quote Link to comment Share on other sites More sharing options...
nutter Posted April 16, 2008 Report Share Posted April 16, 2008 make sure you have a stand under the sump otherwise when you take the top bolt out of the rear shock it will all fold up on you. when you have removed the bolt support the rear wheel so as to not break off the rear brake hose from master cylinder. Quote Link to comment Share on other sites More sharing options...
tombo46 Posted April 16, 2008 Report Share Posted April 16, 2008 The only advice I can off is... dont remove the engine from the bike, remove the bike from the engine. secure the engine so theres no risk of it falling and once everything is removed, lift the bike off it. Tom Quote Link to comment Share on other sites More sharing options...
jreilly Posted April 16, 2008 Report Share Posted April 16, 2008 If you have a digital camera take some pics before removing engine.Makes figuring out where all the wires getted tucked away too.Andas someone else said best to lift frame away from engine.You can remove cylinder with everything loose except swing armbolt,but if you go this far might as well remove whole motor.JR Quote Link to comment Share on other sites More sharing options...
raga-rep Posted May 7, 2008 Report Share Posted May 7, 2008 make sure you have a stand under the sump otherwise when you take the top bolt out of the rear shock it will all fold up on you. when you have removed the bolt support the rear wheel so as to not break off the rear brake hose from master cylinder.ive boken 2 haha bloody scorpas im off to buy a quality gasgas lol Quote Link to comment Share on other sites More sharing options...
andat Posted May 8, 2008 Report Share Posted May 8, 2008 ive boken 2 haha bloody scorpas im off to buy a quality gasgas lol See you back here shortly then. Quote Link to comment Share on other sites More sharing options...
godzilla Posted May 10, 2008 Author Report Share Posted May 10, 2008 I would rather cut my face off than ride a gasser.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.