rwillett Posted August 11, 2004 Report Share Posted August 11, 2004 My clutch is dragging on my 01 280 to the state that I can't find neutral at all before a section. Pretty easy when the bike isn't running, but a little embarrassing. I've seen the comments on the US Gas Gas site about measuring the clutch plates and that they expand. The problem I have is I don't know where to start. Give me a Haynes manual and I'll work it out (or hit it with a bigger hammer!) How easy is it to open the cases, check the the clutch plates and replace them or do I need to take it into a dealer. All the best, Rob. Quote Link to comment Share on other sites More sharing options...
colly Posted August 13, 2004 Report Share Posted August 13, 2004 try ringing a gas gas dealer like whites or something and ask for advice or search on google good luck Quote Link to comment Share on other sites More sharing options...
jtt Posted August 13, 2004 Report Share Posted August 13, 2004 Rob, the clutch design on your '01 is totally different than the Pro clutches. In your case, I'd look at the hydraulics first for a dragging problem. Try bleeding the hydraulics with new fluid and see if that helps. Quote Link to comment Share on other sites More sharing options...
rwillett Posted August 14, 2004 Author Report Share Posted August 14, 2004 Thanks, Will bleed the hydraulics and see what that does. Rob. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.