fastandyc Posted April 22, 2008 Report Share Posted April 22, 2008 lost all spark on me rev3,its an 06 model.had it running about 2 weeks ago just for 10 mins or so,everything fine and dandy! today i went to start her just for a wee run,and lo and behold nothing? i already had disconnected thekill switch,as it never worked! just wondering what to look for? very strange this just happened overnight and not when the bike was running? Quote Link to comment Share on other sites More sharing options...
razor Posted April 22, 2008 Report Share Posted April 22, 2008 lost all spark on me rev3,its an 06 model.had it running about 2 weeks ago just for 10 mins or so,everything fine and dandy!today i went to start her just for a wee run,and lo and behold nothing? i already had disconnected thekill switch,as it never worked! just wondering what to look for? very strange this just happened overnight and not when the bike was running? first try a differant plug....... then stater then CDI Quote Link to comment Share on other sites More sharing options...
davieboy Posted April 23, 2008 Report Share Posted April 23, 2008 My Techno did exactly the same thing,went to start it to check all was ok for a trial,wouldn't start.New stator from Lampkins fixed it. Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 23, 2008 Author Report Share Posted April 23, 2008 well first i need a flywheel puller to get a look in there! Quote Link to comment Share on other sites More sharing options...
davieboy Posted April 23, 2008 Report Share Posted April 23, 2008 Try taking the nut off the flywheel and tap it a few times on the outside,it may not be too tight on the taper and will come off.Mine came off easily. I would also advise anyone to always have a kill switch wired up to their bikes.I have seen people fall off in mud or on a hill and the throttle jams wide open.With no kill switch how do you stop it? By the time you turn the petrol off and the carb emptys it will have done some major damage.Just my opinion mind.I race twinshock scrambles and am not allowed to ride without a kill switch. Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 23, 2008 Author Report Share Posted April 23, 2008 cheers davie! i usually lift the bike and fire her upside down if its revvin its tits off! found out tonight its my own stupid fault,ive no spark! had the flywheel weight off for a while now,the 2 screws that held her on were bald as me! so i found 2 with the same thread and countersunk,but,never noticed they were a little longer,screwed em in went to kick the bike,nothing,just solid! and just that little thing has damaged the windings on my stator plate! had a look in tonight with a torch as i spun the flywheel and noticed the damage! feel lick a right prick now! probably need a new stator! ill try a puller from work tomorrow to see if i can get the flywheel off for a better look. Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 23, 2008 Author Report Share Posted April 23, 2008 (edited) looking through beata uk price list can anyone tell me what they call the stator in the price list? do they actually call it the stator? its ok guys just found the parts breakdown! Edited April 23, 2008 by fastandyc Quote Link to comment Share on other sites More sharing options...
ishy Posted April 23, 2008 Report Share Posted April 23, 2008 "No Spark shocked today" I'm a tad slow in this department, but how did it shock you if there were no spark Quote Link to comment Share on other sites More sharing options...
dan williams Posted April 23, 2008 Report Share Posted April 23, 2008 As much for others as yourself please put a proper kill switch on the thing once you get it fixed. It could save your friend's fingers as well as your engine. Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 23, 2008 Author Report Share Posted April 23, 2008 As much for others as yourself please put a proper kill switch on the thing once you get it fixed. It could save your friend's fingers as well as your engine. i will put a proper kill switch on it,one that will work for mre than a week! Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 23, 2008 Author Report Share Posted April 23, 2008 "No Spark shocked today"I'm a tad slow in this department, but how did it shock you if there were no spark i didnt mean i was shocked by any electrical surrent lol meant i was shocked there was no spark Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 23, 2008 Author Report Share Posted April 23, 2008 anyone know the price of the complete stator plate? b4 i get ripped off! Quote Link to comment Share on other sites More sharing options...
ishy Posted April 24, 2008 Report Share Posted April 24, 2008 meant i was shocked there was no spark But you can't of been shocked if there was no spark Quote Link to comment Share on other sites More sharing options...
razor Posted April 24, 2008 Report Share Posted April 24, 2008 (edited) anyone know the price of the complete stator plate?b4 i get ripped off! Edited April 24, 2008 by razor Quote Link to comment Share on other sites More sharing options...
fastandyc Posted April 24, 2008 Author Report Share Posted April 24, 2008 right just on me lunch here at the mo! coggled a puller to get the flywheel off,to see the damage,the actual windings are fine! theresa little black plasticy piece,beside the windings,a piece has broke off it!,ill take a few pics tonight to show you what i mean Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.