godzilla Posted April 26, 2008 Report Share Posted April 26, 2008 The fan on my sy wont come on when bridged i put a new thermostat in the other day but it only worked for a while. how much will a new fan cost? Quote Link to comment Share on other sites More sharing options...
godzilla Posted April 26, 2008 Author Report Share Posted April 26, 2008 the fan is now working, why would it do this ? has it happend to you? Quote Link to comment Share on other sites More sharing options...
baldilocks Posted April 26, 2008 Report Share Posted April 26, 2008 the fan is now working, why would it do this ? has it happend to you? trace all the wiring from the stator and see if its worn through somewhere, normally the fan either works or doesn't in my experience rather than intermittent. Quote Link to comment Share on other sites More sharing options...
ham2 Posted April 26, 2008 Report Share Posted April 26, 2008 (edited) Have you recently removed or altered the lighting circuit wiring? Edited April 26, 2008 by HAM2 Quote Link to comment Share on other sites More sharing options...
godzilla Posted April 26, 2008 Author Report Share Posted April 26, 2008 i unplugged the front light, but this was just unpluged from the headstock. and none of the harnes was removed.. Quote Link to comment Share on other sites More sharing options...
timp Posted April 26, 2008 Report Share Posted April 26, 2008 Under the seat is a black cylindrical unit with a pair of wires coming out. Check the connections and wires into it as the fan will not work without it. I had the wire to it melt on to the middle box. Sometimes the connector needs crimping up a bit. Quote Link to comment Share on other sites More sharing options...
ham2 Posted April 27, 2008 Report Share Posted April 27, 2008 Under the seat is a black cylindrical unit with a pair of wires coming out. Check the connections and wires into it as the fan will not work without it. I had the wire to it melt on to the middle box. Sometimes the connector needs crimping up a bit. Wot he said ! Quote Link to comment Share on other sites More sharing options...
dixie Posted April 28, 2008 Report Share Posted April 28, 2008 I noticed you had an earlyer topic about coating you frame ?? did you do this ? if so check the earth points they may need some coating removed ?? Quote Link to comment Share on other sites More sharing options...
godzilla Posted April 28, 2008 Author Report Share Posted April 28, 2008 Not powdercoated yet, waiting untill the weathers better.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.