theshercorider Posted April 28, 2008 Report Share Posted April 28, 2008 I was thinkin of getin a keihin carb for my sherco 125 but is it worth it? What are the differences? Where from and how much? What about fitting? Quote Link to comment Share on other sites More sharing options...
matt Posted April 28, 2008 Report Share Posted April 28, 2008 if its a new sherco you will need a smaller tank from a 2006 model as the Keihn doesnt fit with the new larger tank. need a larger carb to airbox manifold, although some heat the standard up and stretch it to fit. think you will loose some bottom end grunt but gain lots of top end power and revs. Quote Link to comment Share on other sites More sharing options...
godzilla Posted April 28, 2008 Report Share Posted April 28, 2008 The cabistany model came with the keihin carb, so the carb to airbox rubber from this model should do it .. call rathmells they will tell you for sure Quote Link to comment Share on other sites More sharing options...
matt Posted April 28, 2008 Report Share Posted April 28, 2008 The cabistany model came with the keihin carb, so the carb to airbox rubber from this model should do it .. call rathmells they will tell you for sure they did not do a cabestany 125. distance from carb to airbox on 125 wont be the same as a 290. i think? Quote Link to comment Share on other sites More sharing options...
copemech Posted April 30, 2008 Report Share Posted April 30, 2008 Last time I checked, Paxau does not use the K on the WR bikes in the 125's, why would you? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.