Jump to content

Oil From The Carb Overflow


peterchrismas
 Share

Recommended Posts

Me Sherco 290 has a habit of dripping oil out of the carb overflow. When I took it for a spin around the local quarry after a while it stopped but now when I start it up and ride around the drive its started again.

I don't know how much oil was put in as it was done by the dealer who sold it too me after he had replaced the piston and got the barrel relined.

Should I be concerned :rolleyes:

Peter

Link to comment
Share on other sites

 

 
 
 

I would warm the bike up and drain the oil mesure what you get out just to see how much was in there, take out the filler plug at the same time you take the drain bolt out [lets it drain a bit faster] then refill with 450cc of the oil you use.

The breather pipe needs to do just that but can't when its full of oil, so remove that and clean also.

Now you know it's got the correct amount of oil and can breath

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...