lee harris Posted August 4, 2008 Report Share Posted August 4, 2008 Hi Chaps I need some advice for somthing I have not jet done before. I have several fantic hubs where the steel (or iron?) lining is visually worn out. I think the hubs need glass blasting and powder coating also. So heres my question. Who can do the lining and in what order should I do it? Do I do the cosmetics first and then have the hub relined? Should I rebulid the wheel first? Any advice on who can reline and what it may cost Thanks in advance Lee Quote Link to comment Share on other sites More sharing options...
fantic303 Posted August 4, 2008 Report Share Posted August 4, 2008 Lee, It is very difficult to remove powdercoating with glassblasting. First they need a bath in a "paint remover", then a light glass blasting. After that the relining and at last light glassblasting directly followed with the powdercoating. Quote Link to comment Share on other sites More sharing options...
waltergallons Posted August 4, 2008 Report Share Posted August 4, 2008 Lee Dave Renham - 'INMOTION' Egham Surrey UK- 01784440033 -relined my 240 hubs. From memory I think that it cost about Quote Link to comment Share on other sites More sharing options...
axulsuv Posted August 5, 2008 Report Share Posted August 5, 2008 I agree Lee , reline first then the cosmetics . Glenn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.