francley40 Posted August 14, 2008 Report Share Posted August 14, 2008 (edited) The spring broke on my chain tensioner and I've been trying to fit the new one. Seems like you need to have the strength of King Kong, and at least three arms, to do this. Has anyone got any tips on how to get the little blighter on, please. Thanks. Edited August 14, 2008 by Francley40 Quote Link to comment Share on other sites More sharing options...
kinell Posted August 14, 2008 Report Share Posted August 14, 2008 If it's the same as most bike, hook one end on the swinging arm and fasten a strong cable tie to the other end. Simply pull the cable tie and hook it over the chain tensioner thingy Quote Link to comment Share on other sites More sharing options...
greg Posted August 14, 2008 Report Share Posted August 14, 2008 absolute nightmare, i ended up with bike the upside down,but be careful of your rear plastics,goes on ok then.found it impossible with the bike on a normal stand . watch your fingers! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.