Jump to content

Installed New Sps Carburetor On "08" 3.2 4t


wayne thais
 Share

Recommended Posts

 

How deep is the water you are riding in and how fast are you trying to go. You may need to slow down, or stay out of the deep water. My 08 does have a one way valve in the bottom of the airbox to let water out if it gets in. Water is very hard on engines!

Wayne

Link to comment
Share on other sites

 

Hi Wayne, in hindsight water might be getting in through those vents in the seat area of the mudguard when I going through water, I'm using a fine mesh too cover them at the moment but I might try blocking them off completely.

This drain valve on the airbox, was it a factory fit or your mod? Mines an 07 290 and was thinking of trying to use some sort of non-return valve to allow water out but not let dirty air in at the airbox base.

Link to comment
Share on other sites

 
 

As mine has no mesh on the mudguard, I do run a fiberglass reinforced screen (window) mesh glued to the air filter retainer.

Definately keeps the large crap out of the filter, and seems to aid as a water repellant as well. :D

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...