michaelmoore Posted October 19, 2008 Report Share Posted October 19, 2008 (edited) I discovered that the OD of the VM26 Mikuni bellmouth is just a bit less than the nominal (unstretched) ID of the Miller air filter's integral boot. I made a small adapter to press onto the bellmouth to increase the OD to the point that the boot has to be stretched to fit. It wasn't a big project, but without it the airfilter wasn't staying attached, even when clamped. I thought it was worth mentioning in case someone else had to deal with this same combination of parts. cheers, Michael Edited October 19, 2008 by MichaelMoore Quote Link to comment Share on other sites More sharing options...
swooshdave Posted October 19, 2008 Report Share Posted October 19, 2008 Do you have a picture of the filter as "Miller filter" is a little generic? Quote Link to comment Share on other sites More sharing options...
michaelmoore Posted October 19, 2008 Author Report Share Posted October 19, 2008 Here's the old one: If Miller made that filter to fit the OEM carb, then an OEM filter boot might also have problems mating up to the Mikuni. cheers, Michael Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.