pillar Posted November 27, 2008 Report Share Posted November 27, 2008 I have a stock 05 Rev3 270 and would like to upgrade the foot pegs. What do you guys like the best? Quote Link to comment Share on other sites More sharing options...
phb Posted November 27, 2008 Report Share Posted November 27, 2008 if money is no object get raptors ive had mine for over 3 years now and they are still excellent expensive but the best Quote Link to comment Share on other sites More sharing options...
tombo46 Posted November 27, 2008 Report Share Posted November 27, 2008 Raptor's are cracking pegs but not indestructable (no pegs are!) I think without spending stacks of money, Trialcast's "Ghost" pegs in my experience are great. you can get them from www.trialcast.co.uk All the best Tom Quote Link to comment Share on other sites More sharing options...
judyf Posted November 27, 2008 Report Share Posted November 27, 2008 the best pegs have got to be the 'splat' aluminium pegs, best for grip by far, and you can also change the studs in the pegs, so no more having to file your pegs up! they have got a site i reckon, but theres a link from www.trialstalk.co.uk Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted November 27, 2008 Report Share Posted November 27, 2008 Raptor Racing or hebo's, both are really nice Quote Link to comment Share on other sites More sharing options...
tombo46 Posted November 27, 2008 Report Share Posted November 27, 2008 there is something to take into account though, some pegs are TOO grippy, nothing worse than going for a dab and then finding your feet stick to them! Quote Link to comment Share on other sites More sharing options...
ham2 Posted November 27, 2008 Report Share Posted November 27, 2008 there is something to take into account though, some pegs are TOO grippy, nothing worse than going for a dab and then finding your feet stick to them! A dab? How very dare you . Just to be contrary:- My mate dropped his Mont' onto it's (aftermarket) machined-aluminium footpeg and it fractured. The resultant ''forked weapon'' it left would have gone straight through his boot if his leg was in the way..evil it was..could have been a one off though. Also the aluminium hole can wear quite quickly (where the peg bolt goes through) and you end up with the dreaded... droopy-peg bike !! Rode a bike with( titanium ? Quote Link to comment Share on other sites More sharing options...
zippy Posted November 28, 2008 Report Share Posted November 28, 2008 I am still using the original "ice cream" scoop style pegs on my 2000 Sherco. file them up a bit to get sharp, as far as mud building up in them stop being lazy and just use a stick to clean them out or flick them up and let the spring snap them down a few times. Mud pops out. Save your money for other bits that break. If your pegs are broke or shot, then yep those titanium ones with no cross bracing look like the ones to go with. Quote Link to comment Share on other sites More sharing options...
manx2day Posted December 1, 2008 Report Share Posted December 1, 2008 Raptor pegs are brilliant. Would recommend them. They are expensive but worth it. Quote Link to comment Share on other sites More sharing options...
the addict Posted December 1, 2008 Report Share Posted December 1, 2008 (edited) Got to say the Jitsie ones with the pins inserted are brilliant... i have had them for about 6 months now and have never slipped off the pegs. They have cutouts to allow the mud to drop through, unlike the Beta ones that just bung up until your feet are lifted off them! I heard youve only been out the bike twice in 6 months Heath , wouldnt fancy a Knacker drag accross those Jitsies Raptors, expensive but last years Edited December 1, 2008 by The Addict Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.