hagan10 Posted December 12, 2008 Report Share Posted December 12, 2008 Hi there I have a 2008 sherco 290 which has a switch on the bars with map 1 and map2 on, could any body enlighting me and tell me what the differences are between these? Many Thanks Quote Link to comment Share on other sites More sharing options...
borus Posted December 12, 2008 Report Share Posted December 12, 2008 map 1 - less power, personally, i can feel the difference on the 2t cheers Quote Link to comment Share on other sites More sharing options...
clav3 Posted December 16, 2008 Report Share Posted December 16, 2008 I Quote Link to comment Share on other sites More sharing options...
bobtlr Posted December 16, 2008 Report Share Posted December 16, 2008 is this the sameon the 3.2 4t? i can only feel a difference in the high revs (on a 290 i once tried biggest change was also in high revs in the softer map the bike didnt rev high) regards bob Quote Link to comment Share on other sites More sharing options...
copemech Posted December 17, 2008 Report Share Posted December 17, 2008 (edited) is this the sameon the 3.2 4t?i can only feel a difference in the high revs (on a 290 i once tried biggest change was also in high revs in the softer map the bike didnt rev high) regards bob Seems to be the case! i have been confused as well from both seat of the pants and reports! Personally, I think one would be better off to dump the switch totally, go to base timing, and adjust accordingly if needed! Edited December 17, 2008 by copemech Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.