elliedog Posted January 10, 2009 Report Share Posted January 10, 2009 Just bought a 240 and from various sources can assume that fitting a 200 top yoke (if you can find one) is a vast improvement. Has anyone tried modifying the original 240 yoke by machining off the handlebar mounts and replacing them with a modern MX type handlebar clamp? KTM type looks as if it might do the job. Not too sure what effect drilling two more holes in the yoke would have on its long term durability and my own well being! Quote Link to comment Share on other sites More sharing options...
davyb Posted January 10, 2009 Report Share Posted January 10, 2009 Hi I machined my top yoke, then moved the holes to fit Fat Bar Clamps from renthal, positions the bar slightly over the axis, i will later post photos for you. Quote Link to comment Share on other sites More sharing options...
davyb Posted January 10, 2009 Report Share Posted January 10, 2009 Heres pictures as promised http://i282.photobucket.com/albums/kk254/D...63/DSCN0213.jpg http://i282.photobucket.com/albums/kk254/D...63/DSCN0212.jpg http://i282.photobucket.com/albums/kk254/D...63/DSCN0211.jpg Quote Link to comment Share on other sites More sharing options...
elliedog Posted January 10, 2009 Author Report Share Posted January 10, 2009 Thanks very much for the photos, more or less what I had in mind, now where did I put my hacksaw??? Quote Link to comment Share on other sites More sharing options...
lee harris Posted January 10, 2009 Report Share Posted January 10, 2009 After collecting and moving on several 200 top yokes, i am now left with 5 bottom yokes. The hole in the middle is too big as the shaft is bogger in dia at the botoom so i will get some sleves made. Also I need to weld the hole on one side that was used for the brake cable. Once done, i will fit APICO single bolt fat bar mounts and away we go. right Spud? Lee Quote Link to comment Share on other sites More sharing options...
spud Posted January 10, 2009 Report Share Posted January 10, 2009 After collecting and moving on several 200 top yokes, i am now left with 5 bottom yokes. The hole in the middle is too big as the shaft is bogger in dia at the botoom so i will get some sleves made. Also I need to weld the hole on one side that was used for the brake cable. Once done, i will fit APICO single bolt fat bar mounts and away we go.right Spud? Lee Sounds good to me lee ....i was just reading elliedog orginal post and he mentioned KTM. i've a set of fat bar clamps off my ktm in my garage which are not in use, now where did i leave that tape measure? Quote Link to comment Share on other sites More sharing options...
elliedog Posted January 11, 2009 Author Report Share Posted January 11, 2009 Spud, when you find the tape measure can you let me know if you think it's a goer. Was just looking at various clamps on fleebay and the Katoom ones looked about right. Quote Link to comment Share on other sites More sharing options...
spud Posted January 11, 2009 Report Share Posted January 11, 2009 Spud, when you find the tape measure can you let me know if you think it's a goer. Was just looking at various clamps on fleebay and the Katoom ones looked about right. Offing up the 08 KTM clamps to my Fantic yokes its defo possibility. I did measure the fat bars (handlebar diameter) on my KTM and they came in a 391mm round. My scorpa sy, which has trials fat bars also came in at 391mm round. The original fantic mounts would have to be removed (machined flush) and then two holes drilled throw to yoke to mount the KTM clamps. I would consider fitting the clamps myself but i don't have the tools to machine the top yoke. I've taken a photo of KTM clamps which maybe of use.....let me know if you go for it. Quote Link to comment Share on other sites More sharing options...
hop blip and a jump Posted January 11, 2009 Report Share Posted January 11, 2009 That looks like a good mod. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.