jes42 Posted January 22, 2009 Report Share Posted January 22, 2009 Can anyone give me advice on setting the sag on a 06 rev3 270? I'm 17 stone so a bit heavier than your average trials guy! All advice welcome! Cheer. Quote Link to comment Share on other sites More sharing options...
nzralphy Posted January 22, 2009 Report Share Posted January 22, 2009 Without a rider the bike should sag a little - 5mm is good. You can turn up spring tension only so far, too much and you are asking a light spring to do too much work...if you are heavy build you'll likely need a heavier rear spring With a rider the bike should sag eavenly. Both ends sould sag between 25-33% of available travel. As a guide ..... 25% if you like a lively suspension action, 33% if you prefer a more planted/dead feel to the bike. Quote Link to comment Share on other sites More sharing options...
jes42 Posted January 26, 2009 Author Report Share Posted January 26, 2009 Cheers mate. I'l try it and see. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.