thedktor Posted January 24, 2009 Report Share Posted January 24, 2009 Hi all Looking at picking up an old 348, which is apparently 1980 vintage. Question is, what parts are still available. For example, say the crank is knackered, can you get the bearings? And pistons? Gaskets? Its from a good friend so have the opportunity to at least take the cylinder off to see whats what. The bike runs, so thats a start, but has not been used for 10 years. I want to come to a mutual agreement on price depending on what needs fixing...... Thanks Steve (Hants) Quote Link to comment Share on other sites More sharing options...
toofasttim Posted January 24, 2009 Report Share Posted January 24, 2009 (edited) 1980 vintage 348? I very much doubt it. From '80 'till (I think) 85 they were a 349/350. Spares are freely available. Start with Jared Bates (South West Montesa). There are also a bunch of suppliers in Spain. Look up a member Zulu (Des Britz) on these boards or have a look on facebook for the Cota 348 group (Facebook 348 group) for lot's of info. Edited January 24, 2009 by TooFastTim Quote Link to comment Share on other sites More sharing options...
thedktor Posted January 24, 2009 Author Report Share Posted January 24, 2009 Thanks for thr reply! Also you confirmed something else, it is registered but is presumably a '79 (or earlier) model. I havent actually seen the bike yet which is why I'm a bit vague - it was completely buried in the back of a garage! Would I be right in assuming 348 has 5 speed, 349 has 6 ? That would be an easy thing to check Cheers Steve Quote Link to comment Share on other sites More sharing options...
feetupfun Posted January 24, 2009 Report Share Posted January 24, 2009 (edited) No both are 6 speed An easy way to tell is that 348s have frame tubes under the motor 349s have an aluminium plate 348s have a rear frame loop and 349s don't The motors look different too but it is hard to describe the differences Both have motor prefix 51M 348 - 1976, 77, 78 349 - 1979, 80, 81, 82, ..... Edited January 24, 2009 by feetupfun Quote Link to comment Share on other sites More sharing options...
thedktor Posted January 24, 2009 Author Report Share Posted January 24, 2009 No both are 6 speedAn easy way to tell is that 348s have frame tubes under the motor 349s have an aluminium plate 348s have a rear frame loop and 349s don't The motors look different too but it is hard to describe the differences Both have motor prefix 51M 348 - 1976, 77, 78 349 - 1979, 80, 81, 82, ..... Ah, fantastic, thanks. Googled some images and I see what you mean (frame tubes) Cheers Quote Link to comment Share on other sites More sharing options...
perce Posted January 24, 2009 Report Share Posted January 24, 2009 For some reason I bought one last year, still not sure why, perhaps it's because my first new bike was a 1979 348. This one is a 1979. Quote Link to comment Share on other sites More sharing options...
wayne_weedon Posted January 24, 2009 Report Share Posted January 24, 2009 Looking at picking up an old 348, which is apparently 1980 vintage.Question is, what parts are still available. For example, say the crank is knackered, can you get the bearings? And pistons? Gaskets? Its from a good friend so have the opportunity to at least take the cylinder off to see whats what. The bike runs, so thats a start, but has not been used for 10 years. I want to come to a mutual agreement on price depending on what needs fixing...... I'd say go for it if the price is right. But then I'm a sucker for twinshocks. Parts wont be cheap as they are getting scarcer but you can get lucky. It might even be a good investment the way prices of Classic Twinshocks are going. It's actually cheaper to get into the sport with a several year old mono than a late Twinshock. Wayne.... Quote Link to comment Share on other sites More sharing options...
fellonmelug Posted January 24, 2009 Report Share Posted January 24, 2009 I bought one of the first 349 's in September 1980 , and i assume the 348's where available till then . Quote Link to comment Share on other sites More sharing options...
perce Posted January 24, 2009 Report Share Posted January 24, 2009 I bought one of the first 349 's in September 1980 , and i assume the 348's where available till then . Without looking I think you're a year out, the 349's appeared in 1979, I bought a 348 in late '79 or early '80 cheap as they were selling off what was left. Next one I had was a white 349, pulled my arms out & had the turning circle of a super tanker. Quote Link to comment Share on other sites More sharing options...
thedktor Posted January 26, 2009 Author Report Share Posted January 26, 2009 Well after all that it is a 349!! Says on the side, plus the ali sump shield, no frame tubes. Will start a new thread with some questions.... Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.