andrewwww Posted January 30, 2009 Report Share Posted January 30, 2009 Hi All, I was wondering does anybody make a workshop manual for Gas Gas bikes the likes of Haynes or is there somewhere or someone that can tell me the torque wrench settings for a `04 280pro for such things as the fork clamps, head bolts etc etc. TIA guys Quote Link to comment Share on other sites More sharing options...
wayne_weedon Posted January 30, 2009 Report Share Posted January 30, 2009 Nothing specific. But take a look at this table which may help. http://www.npfasteners.com/pdfs/max-rec-ti...ning-torque.pdf Quote Link to comment Share on other sites More sharing options...
andrewwww Posted January 30, 2009 Author Report Share Posted January 30, 2009 Nothing specific. But take a look at this table which may help.http://www.npfasteners.com/pdfs/max-rec-ti...ning-torque.pdf Quote Link to comment Share on other sites More sharing options...
andrewwww Posted January 30, 2009 Author Report Share Posted January 30, 2009 Nothing specific. But take a look at this table which may help.http://www.npfasteners.com/pdfs/max-rec-ti...ning-torque.pdf Thanks Wayne Quote Link to comment Share on other sites More sharing options...
rcgods Posted January 30, 2009 Report Share Posted January 30, 2009 (edited) Don't forget that whatever you are tightening the bolt into makes a difference to the torque settings, alloy parts can easily have threads stripped by over tightening. Also oiled/coppaslipped/waxed bolts also require a different torque setting. Sherco USA has a guide on general setup and lubrication http://www.shercousa.com/pdfs/sherco_setup...ation_guide.pdf Just checked some of these against a 1970s Sherpa and the specs are roughly the same. Edited January 31, 2009 by rcgods Quote Link to comment Share on other sites More sharing options...
jse Posted January 31, 2009 Report Share Posted January 31, 2009 Hi All, I was wondering does anybody make a workshop manual for Gas Gas bikes the likes of Haynes or is there somewhere or someone that can tell me the torque wrench settings for a `04 280pro for such things as the fork clamps, head bolts etc etc.TIA guys I tried to upload one of the Metric/SAE torque charts I made, but the software deemed me unworthy. Use the 2006' Pro owner's manual at: http://www.trialspartsusa.com/manuals/eng.pdf and you'll have the Metric chart. The 04' manual does not carry the torque values for some reason, but you can also download the 2004 manual for the usual settings for your bike. Cheers. Jon Quote Link to comment Share on other sites More sharing options...
andrewwww Posted January 31, 2009 Author Report Share Posted January 31, 2009 I tried to upload one of the Metric/SAE torque charts I made, but the software deemed me unworthy.Use the 2006' Pro owner's manual at: http://www.trialspartsusa.com/manuals/eng.pdf and you'll have the Metric chart. The 04' manual does not carry the torque values for some reason, but you can also download the 2004 manual for the usual settings for your bike. Cheers. Jon Thanks Jon, yea I have the `04 manual and thats what I couldn't understand that there were no settings in that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.