simonk Posted February 7, 2009 Report Share Posted February 7, 2009 (edited) Hi bought new kill switch black and white wire is earth the other wire goes to the coil do i just join this to the blue wire as seems to be only wire at the coil any one help? Got told yesterday to put wire on LT side ? any help would be much appreaciated cannot follow old wire as old switch disconnected thanks Edited February 8, 2009 by simonk Quote Link to comment Share on other sites More sharing options...
feetupfun Posted February 7, 2009 Report Share Posted February 7, 2009 Yes the killswitch should earth the LT side of the HT coil when pushed. Dunno about your blue wire though - I think all my TYs have a black wire to the LT side of the HT coil. Quote Link to comment Share on other sites More sharing options...
tsr22b Posted February 9, 2009 Report Share Posted February 9, 2009 If you have two wires on your kill switch connect the one to earth and the other to the LT (Low Tension) terminal of the ignition coil. This is the small flat spade terminal and will already have a wire on it coming from the points, so you will now have two wires on the LT terminal. The ignition coil is under the petrol tank. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.