nickrhinos Posted February 28, 2009 Report Share Posted February 28, 2009 (edited) HI EVERYBODY , IT'S BEEN A WHILE SINCE I POSTED SO THINGS MUST HAVE BEEN GOING O.K. WITH PROJECT . I AM NEARING END OF REBUILD SO SOME THINGS ARE REALLY HARD TO SOURCE SUCH AS SPOKES FOR REAR WHEEL FOR 1990 GAS GAS 325 AIRE , THEY HAVE BEEN ON BACK ORDER WITH GAS GAS FOR THE LAST 5 MONTHS AND STILL NO SIGN . IF ANYBODY HAS ANY OR HAS THE LENTH MEASUREMENTS IT WOULD BE A GREAT HELP , CHEERS NICKRHINOS Edited February 28, 2009 by nickrhinos Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 28, 2009 Report Share Posted February 28, 2009 Take one out from each side , measure length, thickness, and bend on end. Try http://www.central-wheel.co.uk/ If they cant help I'm sure they can point you in the right direction. Quote Link to comment Share on other sites More sharing options...
nickrhinos Posted February 28, 2009 Author Report Share Posted February 28, 2009 THANKS FOR CONTACT WILL GIVE THEM A CALL ON MONDAY . SLIGHT PROBLEM AS SPOKES ALL BROKEN ON STRIPPING BACK IN NOVEMBER , ONLY HAVE ONE INTACT SPOKE , CHEERS NICK Quote Link to comment Share on other sites More sharing options...
peterb Posted March 1, 2009 Report Share Posted March 1, 2009 Ay up Nick, I most likely have a full set of spokes at home (NZ) for the old bikes and definately have a 1989 250 aire in the bike shed to measure the spoke length in case not, will have a look tomorrow and PM you. Ta ta, PeterB. Quote Link to comment Share on other sites More sharing options...
nickrhinos Posted March 1, 2009 Author Report Share Posted March 1, 2009 HI PETERB , GREAT NEWS, SHOULD HAVE POSTED QUESTION EARLIER . LOOK FORWARD TO HEARING FROM YOU , NICK Quote Link to comment Share on other sites More sharing options...
peterb Posted March 4, 2009 Report Share Posted March 4, 2009 Hi Nick, I checked the garage and do not have a full set of spokes for the older bikes. The spoke lengths are 202mm spkt side, and 197 disc side, 3.5mm dia. They are the same spokes for all GG trial models up to 1996. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
nickrhinos Posted March 4, 2009 Author Report Share Posted March 4, 2009 HI PETERB , THATS GREAT , I CAN GET ANGLE FROM MY SAMPLE SPOKE AND GET SOME NEW ONES MADE UP LOCALLY . THANKS FOR EVERYBODYS HELP . ENGINE JUST DELIVERED TO ALAN THE SPANNER AT WHITE BROS IN DARLINGTON , HE REALY KNOWS THE ENGINE AND HAS PLENTY OF PARTS . CHEERS NICKRHINOS Quote Link to comment Share on other sites More sharing options...
nickrhinos Posted March 11, 2009 Author Report Share Posted March 11, 2009 HI EVERYBODY , JUST A COUPLE OF WHAT I HOPE ARE THE LAST THINGS . SHOPPING LIST GOES AS FOLLOWS: 1off WHITE SEAT , 1off REPLACEMENT D.E.P. SILENCER and WHATEVER ANYBODY HAS OR KNOWS OF RED AND BLUE GRAPHICS , CHEERS NICK Quote Link to comment Share on other sites More sharing options...
Andy Posted March 11, 2009 Report Share Posted March 11, 2009 Topic merged with existing one, but please use the Free TC Classifieds for Wanted Ads. You are far more likely to get a response that way. PS. Typing in capitals on a Forum is considered SHOUTING Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.