kev99 Posted March 7, 2009 Report Share Posted March 7, 2009 hi all just joined this place . can anyone give me advice on sprocket choice ty 250 i just bought engine nos 493 301 ### i will not be running on the road so i wheelie machine cheers kev Quote Link to comment Share on other sites More sharing options...
tony283 Posted March 7, 2009 Report Share Posted March 7, 2009 The standard for this model would be 13T front and 53T rear. For modern trials and the tighter turns followed by bigger steps I would use a 12T front sprocket. The 11T can be used but it is just a little too low geared in first. If you are changing sprockets, unless they are in very good condition change them ALL and fit a new chain and tensioner block. Tony Quote Link to comment Share on other sites More sharing options...
kev99 Posted March 9, 2009 Author Report Share Posted March 9, 2009 cheers tony but is the rear still 53 t Quote Link to comment Share on other sites More sharing options...
tony283 Posted March 9, 2009 Report Share Posted March 9, 2009 Yes stick with 53T on the rear. Tony Quote Link to comment Share on other sites More sharing options...
kev99 Posted March 10, 2009 Author Report Share Posted March 10, 2009 Thanks for sugestions now were can i buy a 53t rear sprocket? Quote Link to comment Share on other sites More sharing options...
majesty320 Posted March 11, 2009 Report Share Posted March 11, 2009 Sorry to sound a bit thick, but is it 428 0r 520 chain Quote Link to comment Share on other sites More sharing options...
b40rt Posted March 11, 2009 Report Share Posted March 11, 2009 http://www.trialsbits.co.uk/index.php?cPath=78_107_217 Quote Link to comment Share on other sites More sharing options...
tt5th Posted March 13, 2009 Report Share Posted March 13, 2009 Which model TY250 is it that uses a 53T rear sprocket? I thought it was 42T then drop the front to 11T or 10T depending on how slow you need to go. Quote Link to comment Share on other sites More sharing options...
feetupfun Posted March 13, 2009 Report Share Posted March 13, 2009 Which model TY250 is it that uses a 53T rear sprocket? I thought it was 42T then drop the front to 11T or 10T depending on how slow you need to go. If you use 428 chain (which is what came standard on all TY250 twinshocks), the standard rear is 53 teeth. tt5th, I suspect you are talking about sprockets that use 520 chain, which of course have less teeth for the same diameter than sprockets for 428 chain. Quote Link to comment Share on other sites More sharing options...
tt5th Posted March 13, 2009 Report Share Posted March 13, 2009 Ah ha! Why thank you for clearing that up! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.