edgas250 Posted April 2, 2009 Report Share Posted April 2, 2009 My life with my scorpa has nto had the best of starts, now more problems, I took my bike out tonight after work, so strapped it in the van this morning, then when i got to it tonight, there was oil on the floor and has been seaping out of one of the fork seals! has this blown the shock? or just the seal? Second i have a tapping coming from what sounds like the top end of the engine, the noise is kind of like a drill on hammer setting if that makes sence? And i know the scorpas have a whine but usually in second/third it will have a big whine then go if reving the bike I know theres alot to take in there but any help would be appreciated, Thanks Matt Quote Link to comment Share on other sites More sharing options...
paulmac Posted April 2, 2009 Report Share Posted April 2, 2009 Hi Mate Sounds like you Quote Link to comment Share on other sites More sharing options...
edgas250 Posted April 3, 2009 Author Report Share Posted April 3, 2009 Thanks for that im sending it into a local bike shop tomorrow, and get them to sort the lot out! i havn't got time at the moment to be bothering doing it myself! How much would i be looking at paying for main or little bearings fitted? Thanks Quote Link to comment Share on other sites More sharing options...
edgas250 Posted April 5, 2009 Author Report Share Posted April 5, 2009 its gone into repair he seems to think its something to do with the clutch or transmission which im not sure is better or worse than little ends! Quote Link to comment Share on other sites More sharing options...
paulmac Posted April 5, 2009 Report Share Posted April 5, 2009 Just goes to show how tricky isolating a noise can be - all the best mate. Paul Mac Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.