edholland Posted April 7, 2009 Report Share Posted April 7, 2009 Mine are bend badly and tried to straighten them but with no luck. Have a Section for parts and tried them but the holes don't line up. Should i weld up the holes on the section ones and drill new holes or is there and alternative that would bolt on without mods ? Cheers, Ed Quote Link to comment Share on other sites More sharing options...
chewy Posted April 7, 2009 Report Share Posted April 7, 2009 Ed are you the guy woh displayed a load of photos recently? Have you measured the brackets on frame? "std." footrests nowadays are 25mm wide and 17 mm from back or heel of footrest to hole cntr. Quote Link to comment Share on other sites More sharing options...
edholland Posted April 7, 2009 Author Report Share Posted April 7, 2009 Thanks for the measurements Chewy ! i tried the Section footpegs and they did fit with some work only the holes were different . Maybe i should get some new pegs and weld new mounts ? the bike needs lots of work anyway Only pictures (3) i posted are on my TC Garage account so i dont think it's me . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.