Jump to content

09 4rt Fan Doesn't Move


jwc
 Share

Recommended Posts

Hi,

I've got a new '09 4rt (Repsol). I had my first good 20 minute ride today. I noticed the fan never came on (I was mostly in first gear going through trees slowly, 20C outside). Is this normal? I kept watching it expecting it to come on.

Also, I notice when it sits after riding that one of the (vent?) tubes drips a few drops of oil - is this normal?

Thanks

Edited by jwc
Link to comment
Share on other sites

 

I would have said at that temperature the fan should have come on by then.

When you say drips a little oil is it blue? If so it could be anti-freeze as there is a breather from the coolant cap down to just under the front exhaust pipe and that would put out expanded coolant as these bikes unlike cars don't have an expansion tank. Some people mistake this for oil as the coolant has an 'oily' feel to it, but its bright blue in colour.

I would get it checked by your supplying dealer assuming its a brand new bike.

Big John

Link to comment
Share on other sites

 
I would have said at that temperature the fan should have come on by then.

When you say drips a little oil is it blue? If so it could be anti-freeze as there is a breather from the coolant cap down to just under the front exhaust pipe and that would put out expanded coolant as these bikes unlike cars don't have an expansion tank. Some people mistake this for oil as the coolant has an 'oily' feel to it, but its bright blue in colour.

I would get it checked by your supplying dealer assuming its a brand new bike.

Big John

Thanks for the reply. I checked the drips, definitely oil.

Thinking the fan through... I did replace the big light assembly with the much smaller "cat eye" light that came with the bike, there was some wiring removed (though all the connections seemed pretty obvious). Maybe there is a non-obvious (to me anyway) connection that has to be made. Any ideas? I'm sure someone on here knows this one.

I'd take it to the nearest dealer, but they are a 12 hour drive. I will send them an email as well.

Link to comment
Share on other sites

 
Thanks for the reply. I checked the drips, definitely oil.

Thinking the fan through... I did replace the big light assembly with the much smaller "cat eye" light that came with the bike, there was some wiring removed (though all the connections seemed pretty obvious). Maybe there is a non-obvious (to me anyway) connection that has to be made. Any ideas? I'm sure someone on here knows this one.

I'd take it to the nearest dealer, but they are a 12 hour drive. I will send them an email as well.

My mate reckons you've taken the fan relay off.

Its a black thingy in an oblong sheath needs to be relocated above the module behind the barrel, brackets there.

(thanks M sport)

Link to comment
Share on other sites

 
My mate reckons you've taken the fan relay off.

Its a black thingy in an oblong sheath needs to be relocated above the module behind the barrel, brackets there.

(thanks M sport)

Was it located in the headlight assembly? If so I definitely removed it. The manual showed it located not far from the rear shock so I thought I was ok. I'll check it out tonight, thanks!!!

Link to comment
Share on other sites

 
 
 
 

Is this a feature with later 4rts. I have removed lighting etc on 2005 model without relocation of fan relays.

315 and 4rt wiring looms used to be so easy to disconnect lighting as could just unplug extra wiring and re plug together the 2 ends of the loom

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...