wozar Posted April 28, 2009 Report Share Posted April 28, 2009 could any one help i have taken the crank shaft assembly out of my sons txt 200 so i can put new big end bearing in but can't seem to split it so i can get the con rod out ? Quote Link to comment Share on other sites More sharing options...
stork955 Posted April 28, 2009 Report Share Posted April 28, 2009 Gday, you need a big press and a lathe with a dial gauge at least to align it when going back together. Better still a crank alignment jig. Easiest way is to get your local bike shop (any brand) to do the job for you. Or send it to me in Australia, I do them for free for trials riders. Cheers, Stork Quote Link to comment Share on other sites More sharing options...
wozar Posted April 28, 2009 Author Report Share Posted April 28, 2009 thanks for the offer but just a bit to far for this pomy to send it to you . thank for the info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.