furse Posted July 2, 2009 Report Share Posted July 2, 2009 I've just finnished rebuilding a 200 fantic, which I bought as a non runner in bit of a sorry state, I rode it yesterday for the first time, well made up with it. A few minor things need changing and sorting before I strip it again to have the frame painted. Has anyone got on ideas why the forks top out very easily, i've put 250ml of 10w oil in each leg, I understand it that the oil feeding through the dampning rod slows the forks rebounding ? I've never used oil heavier than 10w in any bike, but is that what it needs? or am I missing something out of the forks, anyone got a brake down diagram of forks? Quote Link to comment Share on other sites More sharing options...
somerset steve Posted July 27, 2009 Report Share Posted July 27, 2009 Hi there. I have the same problem on my 200. I am running the same set up as you have described. If i get any info i will post it here for you. Steve Quote Link to comment Share on other sites More sharing options...
whizzy Posted July 28, 2009 Report Share Posted July 28, 2009 When i've worked out how to post an image i'll post up the exploded view of the forks Quote Link to comment Share on other sites More sharing options...
furse Posted August 2, 2009 Author Report Share Posted August 2, 2009 Thanks guys, I have been able to get an exploded view of forks from a SWM manual (they used same forks) but doesn't show anything missing at first look. I have tried replacing top out spring with a longer one ( a valve spring off a Hilman Imp), still the same problem but not as bad. Quote Link to comment Share on other sites More sharing options...
b40rt Posted August 2, 2009 Report Share Posted August 2, 2009 Try adding a little extra oil to each leg. There was a problem with the SWM forks (not the Betor ones) where a washer on the damper rods got twisted and allowed the oil to pass. Remedy was a thicker washer with other dimensions the same. You have to make a tool with a tapered end to undo the bolt at the bottom of the fork legs. Quote Link to comment Share on other sites More sharing options...
furse Posted October 7, 2009 Author Report Share Posted October 7, 2009 Just to update, I have got a set of 241 forks after dismantling them i've found the dampner rod is longer than my original 200 rods. Does anyone now what the length of the dampner rod should be. I've put the longer dampner rod and fork stanchion into the 200 leg, so I do know have a longer fork. Not tried it yet but will soon be able to bring the reborn 200 back out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.