Jump to content

Rev 4t


rev4t
 Share

Recommended Posts

can anybody help . i have a rev4t 08 . thats bad to start, fouling plug up , and struggles to rev clean. i have .......... re jetted carb,re set valves, had stator re wound, thouroughly cleaned out all carb and choke jets,new plugs, clean air filter, altered air screw , breather pipes clean

Link to comment
Share on other sites

 

 
 

Gday, not really on a 4 stroke. What heat range plug are you using? What does the plug look like when it is fouled - is it wet looking? Or is it a dry soot? This makes a difference in diagnosis, wet is oil and dry is fuel.

Cheers,

Stork

Link to comment
Share on other sites

 

Hi. My Rev 4T has a very sooty plug. I am running a Iridium plug with 0.6mm gap. It starts and runs fine - one slow kick and it is running.

Have you replaced the problematic Beta kill button? They are ****e, replace it. Check you have a good earth to the frame for the ignition system ... this has fixed a few of these bikes starting problems.

Jetting is critical - Raise the needle all the way, replace the main jet with #112.5, and idle mix set 3.5-4 turns out.

Ralph

Edited by NZRalphy
Link to comment
Share on other sites

 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...