tombo46 Posted October 3, 2009 Report Share Posted October 3, 2009 My frame recently broke either side of the rear shock (the bent tubular peices) on my 08 pro, does anyone know if this can be welded and will it be strong enough? if not, how much would I be looking at for a new 08 frame or 09 frame as a rough guide? All the best Tom Quote Link to comment Share on other sites More sharing options...
no1 Posted October 3, 2009 Report Share Posted October 3, 2009 If it were mine i would take it back to gasgas uk if you had an 08 car that the chassis broke they would replace it Quote Link to comment Share on other sites More sharing options...
tombo46 Posted October 3, 2009 Author Report Share Posted October 3, 2009 aye but you dont do 8ft drop-offs in a car!! will give them a shout though, they may be sympathetic to me and work me out a deal. Tom Quote Link to comment Share on other sites More sharing options...
johnkennedy Posted October 3, 2009 Report Share Posted October 3, 2009 i had an 07 sherco that broke in 08, and they replaced the frame free of charge, so give them a phone and you might get lucky!!! Quote Link to comment Share on other sites More sharing options...
chewy Posted October 3, 2009 Report Share Posted October 3, 2009 Isn't all the showcasing at world rounds etc about telling us that these bikes are best for jumping off 8 foot ledges etc. let us know how you get on with your complaint nice to hear that sherco are offering good service we all know that beta offer excellent after sales service. Quote Link to comment Share on other sites More sharing options...
ham2 Posted October 3, 2009 Report Share Posted October 3, 2009 My frame recently broke either side of the rear shock (the bent tubular peices) on my 08 pro, does anyone know if this can be welded and will it be strong enough? if not, how much would I be looking at for a new 08 frame or 09 frame as a rough guide?All the best Tom Jeez Tom, they beef up the swing-arm...then look what happens...There's two ways GasGas are going to deal with this: No.1.''It's a competition vehicle Sir,there's no guarantee with them''...blah.blah. or No.2.''Adam clearly demonstrates to the world that these vehicles can handle such drop offs..please step into the office and we'll see what we can do for you Sir...'' Good luck Tom,I hope you get a No.2 out of them Quote Link to comment Share on other sites More sharing options...
laser1 Posted October 3, 2009 Report Share Posted October 3, 2009 The problem is that Adam knows how to soak up the force of the landing and us mere mortals dont. Probably weighs less too. Scaling the weight and talent - I limit myself to 1ft drops.... Quote Link to comment Share on other sites More sharing options...
chewy Posted October 3, 2009 Report Share Posted October 3, 2009 Yes but Adam gets paid a lot of dosh which is a considerable part of the 4 grand price we pay for 2 grand machines Quote Link to comment Share on other sites More sharing options...
copemech Posted October 4, 2009 Report Share Posted October 4, 2009 The material of the frames is quite weldable. Can be done with Mig or Tig style, although I would suggest you seek out a qualified pro for suggestions and or possible reinforcement in the break area. Are there any qualified aircraft welders in your area that do such things as engine mount repairs and such, or race car guys that are skilled with the Tig torch? Stay away if one wants to do it with the gas rig. It can be done, but? Quote Link to comment Share on other sites More sharing options...
jse Posted October 4, 2009 Report Share Posted October 4, 2009 The material of the frames is quite weldable. Can be done with Mig or Tig style, although I would suggest you seek out a qualified pro for suggestions and or possible reinforcement in the break area. Are there any qualified aircraft welders in your area that do such things as engine mount repairs and such, or race car guys that are skilled with the Tig torch? Stay away if one wants to do it with the gas rig. It can be done, but? Copey's right. The MIG will work well but it's hard to beat a TIG in the right hands (and the welds are usually much cleaner). The frames are Chromoly, so make sure the welder knows that. A gas welder creates too much heat in the outlying areas and a TIG concentrates it just in the weld area and is my favorite way to weld. A CAW (certified aircraft welder) is really hard to find but they are the absolute experts. I had a friend who was one and just for fun he showed me his skill one time by TIG welding a razor blade to a short length of railroad track. You had to see it to believe it. Jon Quote Link to comment Share on other sites More sharing options...
copemech Posted October 4, 2009 Report Share Posted October 4, 2009 Copey's right. The MIG will work well but it's hard to beat a TIG in the right hands (and the welds are usually much cleaner). The frames are Chromoly, so make sure the welder knows that. A gas welder creates too much heat in the outlying areas and a TIG concentrates it just in the weld area and is my favorite way to weld.A CAW (certified aircraft welder) is really hard to find but they are the absolute experts. I had a friend who was one and just for fun he showed me his skill one time by TIG welding a razor blade to a short length of railroad track. You had to see it to believe it. Jon Jon, I have all three in my shop, the Tig works well, but sometimes I do not! On a standard repair, I would not hesitate to burn in a good Mig repair, nothing wrong with that either! Point being, get a good welder, I am not! Quote Link to comment Share on other sites More sharing options...
jmspear Posted October 4, 2009 Report Share Posted October 4, 2009 Tombo46, If you do need to weld it and don't personally know anyone in Sheffield area, phone up the guys at TWI (The Welding Institute) - Cambridge area I think, but google it and they will put you in touch with a (local) welder who has the right code's for this type of welding - good luck Quote Link to comment Share on other sites More sharing options...
ham2 Posted October 4, 2009 Report Share Posted October 4, 2009 A CAW (certified aircraft welder) is really hard to find but they are the absolute experts. I had a friend who was one and just for fun he showed me his skill one time by TIG welding a razor blade to a short length of railroad track. You had to see it to believe it.Jon That's a bold claim! I'm not doubting you though. Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted October 4, 2009 Report Share Posted October 4, 2009 Sorry to hear about that Tom, knowing GasGas UK though, they will probably just tell you where to go, i recently had a Cracked Radiator on mine, but GasGas UK wouldn't do anything about it, had to buy a new one Instead! See if you can get it welded somewhere. Cheers, Ben. Quote Link to comment Share on other sites More sharing options...
tombo46 Posted October 4, 2009 Author Report Share Posted October 4, 2009 spoke to craig robinson, he had one crack in the same place and said it can be welded no problem. going to take it to him next week and hopefully pick it up saturday when I go to the GG test day =] Thanks people. Tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.