thomastomsk Posted October 16, 2009 Report Share Posted October 16, 2009 hi ,i have just got hold of a side stand for my sy250,as it never had one fitted when i bought the bike.when i came to fit said stand only two of the three holes line up.i can drill a third hole in the swing arm,so it will take the stand,but was wondering if they have had different side stands through out the years,and also is drilling the extra hole the way to go..thanls for any advice ,tom Quote Link to comment Share on other sites More sharing options...
godzilla Posted October 16, 2009 Report Share Posted October 16, 2009 The stands were upraterd on the 07 bikes, if i remeber pre 07 bike had a smaller hole on the alloy gusset, the swingarms are the same so i cant see a problem drilling it out a couple of mm's. Quote Link to comment Share on other sites More sharing options...
thomastomsk Posted October 17, 2009 Author Report Share Posted October 17, 2009 drilled the hole ,,,,fitted the stand,,,spot on ,,thanks for the info ,tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.