myluck Posted November 15, 2009 Report Share Posted November 15, 2009 looking at my mates bike as it may be for sale. tidy bike just been re-built profesionaly. new main bearings small end and piston rings and carnk seals. it hadnt been started and had a good run in a while i noticed when he started it cold and when it was idling oil was dripping from over flow it stopped and only a couple of mill came out. was out on it the whole day it was sound did not miss a beat and didnt over heat. got it back to his house cleaned it then i noticed coolant dripping form the rad again just a couple of mill. could this be realated and could it be a problem. thanks Jorge Quote Link to comment Share on other sites More sharing options...
zippy Posted November 16, 2009 Report Share Posted November 16, 2009 Possible that after the rebuild the Gearbox oil and Coolent were just a tad bit over filled and are now evening themselves out. With it only being a couple ml. that may be a real possibility. If continues to do it and the bike runs odd or performs poorly, definitely would need to be looked at. Just my 2 cents. Quote Link to comment Share on other sites More sharing options...
ham2 Posted November 16, 2009 Report Share Posted November 16, 2009 Wot ZIPPY sez....Yup the fluids like to find their own level after a re-build, should dry up after a couple of sessions. Quote Link to comment Share on other sites More sharing options...
myluck Posted November 16, 2009 Author Report Share Posted November 16, 2009 thanks guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.