vgstef Posted October 28, 2010 Report Share Posted October 28, 2010 Why guys like Lampking , Fajardo do not use this exhaust ? Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted October 28, 2010 Author Report Share Posted October 28, 2010 Hi, It's because it's not a factory part, So therefore they are not used on the factory bikes, the factory bikes are made up of factory parts only, But the Top Trial Team bikes as rode by Wiggy & J.Challoner & J.Sheppard Use them, Because it is a TTT Part. Hope that explains it ok. Quote Link to comment Share on other sites More sharing options...
vgstef Posted October 28, 2010 Report Share Posted October 28, 2010 I will order the bosi arrow this week. Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted October 28, 2010 Author Report Share Posted October 28, 2010 I will order the bosi arrow this week. Good lad, you will be very impressed, Also get a 45 pilot jet for your carb if you can, that will improve your bike's performance & will make it sound even better! Quote Link to comment Share on other sites More sharing options...
vgstef Posted December 9, 2010 Report Share Posted December 9, 2010 Good lad, you will be very impressed, Also get a 45 pilot jet for your carb if you can, that will improve your bike's performance & will make it sound even better! What about needle position ? the needle was on the bottom when receiveing my bike ( 5 position ) Beta mention to mouve the needle to 4 position after break in ? Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted December 9, 2010 Author Report Share Posted December 9, 2010 What about needle position ? the needle was on the bottom when receiveing my bike ( 5 position ) Beta mention to mouve the needle to 4 position after break in ? I haven't changed the needle position on mine, Because it runs good as it is, But I suppose if Beta have mentioned it to you it might well be worth doing, If you do it, will you let me know if it improves the bike a lot. Have you got the Arrow Exhaust on? are you liking it? Quote Link to comment Share on other sites More sharing options...
vgstef Posted December 15, 2010 Report Share Posted December 15, 2010 The exhaust should be here next week . Any boby interested to purchase the BETA Titanium exhaust ( made by Akropovic) for the EVO let me know I will sell mine when I get the Arrow. I did use the exhaust for one years , only one small dent . The exhaust is very light and I does increase the torque at low to mid RPM. I got the arrow and i am very impressed. WOW 45 idles jet and needle set at 5 position. Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted December 15, 2010 Author Report Share Posted December 15, 2010 I got the arrow and i am very impressed. WOW 45 idles jet and needle set at 5 position. Hehe, I knew you would like it, I just remebered When I bought my Arrow exhaust through Lampkins, they set up all the carb properly as well, so Mine will be in the 5th position on the needle also. Have to say when mine ticks over it just pops all the time, Sounds just the same as a TTT factory bike! Quote Link to comment Share on other sites More sharing options...
jackthelad98 Posted January 30, 2014 Report Share Posted January 30, 2014 Do you know someone selling one for second hand/cheaper? For a '10 evo 125 Thanks Quote Link to comment Share on other sites More sharing options...
Andy Posted January 30, 2014 Report Share Posted January 30, 2014 Do you know someone selling one for second hand/cheaper? For a '10 evo 125 I'm pretty sure one was posted on our dedicated classifieds site very recently Quote Link to comment Share on other sites More sharing options...
tman427 Posted January 31, 2014 Report Share Posted January 31, 2014 About £500 ish, The performance & sound is imense though. Any jet changes on the carb required with the new silencer? Quote Link to comment Share on other sites More sharing options...
benbeta23 Posted February 1, 2014 Author Report Share Posted February 1, 2014 (edited) Any jet changes on the carb required with the new silencer? I've done a few jetting changes to my 300, But it will be run fine on standard settings Edited February 1, 2014 by benbeta23 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.