skyline Posted December 22, 2009 Report Share Posted December 22, 2009 Hi all , anyone know the best place to get a pair of front fork oils seals for my beta rev3 270 2006. Looked on e-bay & only sites selling are in USA. Thanks for any help. P.S new to site & back to trials dabbling. Quote Link to comment Share on other sites More sharing options...
redbull8447 Posted December 22, 2009 Report Share Posted December 22, 2009 hi m8 where you from try these guys http://www.trialsuk.co.uk/ or http://www.bvm-moto.co.uk/ regards Quote Link to comment Share on other sites More sharing options...
skyline Posted December 22, 2009 Author Report Share Posted December 22, 2009 Hi mate I,m from LEEDS. cheers Quote Link to comment Share on other sites More sharing options...
houseape1000 Posted December 22, 2009 Report Share Posted December 22, 2009 Lampkins beta dealership......Very helpful. Based in north yorkshire I think, so not too far. clicky here Quote Link to comment Share on other sites More sharing options...
pedronicman Posted December 23, 2009 Report Share Posted December 23, 2009 Lampkins beta dealership......Very helpful. Based in north yorkshire I think, so not too far. clicky here Lampkins are the Beta importer not a dealer! Quote Link to comment Share on other sites More sharing options...
ikb Posted December 23, 2009 Report Share Posted December 23, 2009 There are some on Ebay uk, Moto Merlin and others have them in their Ebay shops Quote Link to comment Share on other sites More sharing options...
nh014 Posted December 23, 2009 Report Share Posted December 23, 2009 I'm not sure about the UK, but here in the States, fork, engine, and transmission seals are readily available at any decent industrial bearing supply house, and at considerably less cost than through a motorcycle dealer. Quote Link to comment Share on other sites More sharing options...
stork955 Posted December 23, 2009 Report Share Posted December 23, 2009 Gday, aftermarket fork seals are available from any bike dealer. They will have a listing for the Beta as they use a generic Paoli. Failing that you can source them by size - measure the diameter of the leg, the height and the outside of the seal and go from there. I cant remeber the size but maybe someone has it written somewhere. Just a note for nh014, Fork seals are not a standard TC oil seal and that type of seal will leak... They also dont always come in the ISO sizes available from bearing shops. Expect to pay 35 Australian Peso's for Fork seals, your currency may vary! Merry Xmas, Stork Quote Link to comment Share on other sites More sharing options...
skyline Posted December 25, 2009 Author Report Share Posted December 25, 2009 Hi guys thanks for all the info . I did find some on the site links posted. They are pretty cheap & readily available. I did think they were not the run of the mill 38mm seals as the great pounding they get from the jumps. Anyway tghanks again & great to know there,s folks from all over the world on here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.