sherco25016 Posted December 23, 2009 Report Share Posted December 23, 2009 (edited) hi my sherco 250 wont start i have been trying for about 3 hours and no joy when i kick the bike the light is coming on and ths it, it hasnt been started for abut 2 an a half months i can put it down to the cold weaher and that i just want to get it started if anyone can help that would help that wuld begrat thanks Edited December 23, 2009 by sherco25016 Quote Link to comment Share on other sites More sharing options...
1sherco1 Posted December 23, 2009 Report Share Posted December 23, 2009 drain the petrol and put new in Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 23, 2009 Report Share Posted December 23, 2009 You have to show the bike who`s the boss. Make sure the petrol to the on position. After ten kicks, throw it to the ground in disgust. Jump up and down on it, yelling `piece of sh?t, piece of sh?t!!` Then pick it up and it will start with in two kicks. Works 99% of the time. Quote Link to comment Share on other sites More sharing options...
the addict Posted December 23, 2009 Report Share Posted December 23, 2009 After ten kicks, throw it to the ground in disgust Quote Link to comment Share on other sites More sharing options...
ham2 Posted December 23, 2009 Report Share Posted December 23, 2009 Are you lost?? This is Beta land........OOOOH it's dark in here !! Quote Link to comment Share on other sites More sharing options...
the addict Posted December 23, 2009 Report Share Posted December 23, 2009 Did'nt spot that Drain tank and carb, clean carb, new fuel and plug away she goes Quote Link to comment Share on other sites More sharing options...
dang2407 Posted December 23, 2009 Report Share Posted December 23, 2009 Take out the engine and put a Beta one in. Then replace the frame, plastics and electrics with Beta ones - job done! Quote Link to comment Share on other sites More sharing options...
1sherco1 Posted December 23, 2009 Report Share Posted December 23, 2009 change it to a beta ha betas are only good for bonfires Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 23, 2009 Report Share Posted December 23, 2009 First post is the way I like to show the newbies. If your bike has sat for a while the easy way to get it started is to lay it on it`s side till you have fuel coming out the the over flow. This should prime the engine and start first or second kick. I this does not work you might need to clean the carb, pilot jet is probably plugged up. I like to throw in some language for the spectators. Quote Link to comment Share on other sites More sharing options...
flynz4me Posted December 24, 2009 Report Share Posted December 24, 2009 (edited) hi my sherco 250 wont start i have been trying for about 3 hours and no joy when i kick the bike the light is coming on and ths it, it hasnt been started for abut 2 an a half months i can put it down to the cold weaher and that i just want to get it started if anyone can help that would help that wuld begrat thanks Tell you what, send it to me and I'll get er runnin' for you I'd try the new plug, fresh gas, drain the float bowl, turn the gas on, and it'll come back to life. If not one of the jets are probably gunked up. Edited December 24, 2009 by flynz4me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.