thomastomsk Posted January 8, 2010 Report Share Posted January 8, 2010 my ty175 is reving to high on tick over and the tick over screw does not stop it any ideas any body,,,,thanks tom Quote Link to comment Share on other sites More sharing options...
technowaldo Posted January 8, 2010 Report Share Posted January 8, 2010 more than likely drawing air from the inlet side check all your connections and the rubber inlet manifold Quote Link to comment Share on other sites More sharing options...
gizza5 Posted January 8, 2010 Report Share Posted January 8, 2010 I presume the slide is seated at the bottom of the carb? If not then the cable would need adjustment. Sorry if this sounds simple but it can be easily missed. Quote Link to comment Share on other sites More sharing options...
andy.t Posted January 8, 2010 Report Share Posted January 8, 2010 Just to add to the checks with regards the too much air, where the oil lube system connects to the carb, if this has been removed I have known the pipe not to be blocked off as it should be. This would cause the high revs. Quote Link to comment Share on other sites More sharing options...
chewy Posted January 8, 2010 Report Share Posted January 8, 2010 Is it weather related? ice? in cable even in carb at seat of slide..once had that on a gas gas ..think of the windchill factor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.