ben_r Posted January 24, 2010 Report Share Posted January 24, 2010 Hi Guys, My Dad has his new toy - a nice 1981 RL325 Beamish. It currently runs an RL250 tank, and while it looks nice, its just not right. Is there anyone out there who has or makes the larger RL3235 Alloy tank. cheers, Ben Quote Link to comment Share on other sites More sharing options...
jordi Posted January 25, 2010 Report Share Posted January 25, 2010 This site may be a source of info. http://www.beamishownersclub.com/_sgg/f10000.htm Quote Link to comment Share on other sites More sharing options...
beamish owners club Posted January 30, 2010 Report Share Posted January 30, 2010 Hello Ben, there is no difference between the RL250 tankd and the RL325 tank, the differences were between the years. In 1981 both models had the same tank. In 1978 when the RL325 first hit the scene it had a steel tank. In 1979 when the RL250N was launched, it also had a steel tank whereas the RL325 had the alloy tank. from late 1979 tanks for both models remained the same until the end of production, the only different tank available was the Scottish Six Day tank. If you send me photos of your dad's tank to jim@beamishownersclub.com I will tell you if it is the right tank or just the wrong paint job / decals. Cheers, Quote Link to comment Share on other sites More sharing options...
ben_r Posted January 31, 2010 Author Report Share Posted January 31, 2010 Hi Jim, Thanks to your site we figured it out. His Beamish is a 78/79 (has the rear frame loop), and it currently has the steel tank, so it is correct. He does like the look of the alloy tank, so we will keep a look out for tone of them too. I attached some photos too, but for what ever reason, the last person put 250cc decals on it too. Cheers, Ben Quote Link to comment Share on other sites More sharing options...
beamish owners club Posted February 7, 2010 Report Share Posted February 7, 2010 Hi Ben, Glad you found the site useful. The only way to be absolutely certain it's not a RL250N (which is a 1979 bike with a steel tank) is to measure the bore (70mm = 250cc, 80mm = 325cc). Of course if it pulls your arms off when you open the throttle, it's probably a 325! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.