searay175 Posted February 9, 2010 Report Share Posted February 9, 2010 Does anyone know if the bushing in the frame where the brake pedal pivots is replaceable? Both of my twinshock 250's are well worn and I do not see it shown on parts diagrams. They are ty250a and ty250c. thanks! Steve Quote Link to comment Share on other sites More sharing options...
ducman Posted February 9, 2010 Report Share Posted February 9, 2010 Steve,it is not replaceable. Chrs:Mike Quote Link to comment Share on other sites More sharing options...
kevin j Posted February 11, 2010 Report Share Posted February 11, 2010 can you run a reamer through and then press in a composite or brass bushing? I have done that on others. kcj Quote Link to comment Share on other sites More sharing options...
dougalthedog Posted February 12, 2010 Report Share Posted February 12, 2010 I had a brass sleeve made for a ty mono, and have seen nylon ones used before. I would have thought any decent engineering shop should be able to sort it out for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.