ikb Posted March 7, 2010 Report Share Posted March 7, 2010 Hi, Whats the best option for refitting the gear lever with a flywheel weight? Obviously the lever doesnt go fully on the shaft due to the extra width of the flywheel cover, previously I have bent and filed a bit off the back of the lever, but it never seems to go right on the shaft. I was just wondering what others do? I have noticed my flywheel kit has a 10mm cover spacer (its an unknown make that is held on with a hollow nut threading into the puller threads on the flywheel) wheras my friends Hebo kit has about a 7mm cover spacer so I may try his cover on to see if it clears my flywheel and try to buy a hebo spacer if you can buy them separately? Ian Quote Link to comment Share on other sites More sharing options...
richt Posted March 7, 2010 Report Share Posted March 7, 2010 I have an 'S3' weight, it's fitted with 2 countersunk screws and the cover spacer is only 6mm, the lever will just about go fully on the shaft with no clearance so I pull it back 1mm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.