martinm Posted March 13, 2010 Report Share Posted March 13, 2010 In amongst the van full of bits I collected from Italy last weekend were a selection of "works" modified front pipes. The top picture shows a standard chrome finish front pipe with the modified ones either side. I had a quick attempt at fitting them on my bike, but both would need the fins removing from the head before fitting...which I might try at a later date. The third pipe fitted straight on my bike, and has a couple of extra bends before it hits the middle box, and looks similar to the production front pipe on the Jumbo 350's. It looks neater, but I cant say it runs any different. Quote Link to comment Share on other sites More sharing options...
steve Posted March 13, 2010 Report Share Posted March 13, 2010 A nice little find there Martin. I noticed the Aprillia clutch casing on the picture - would that be from the later water cooled Climbers? Quote Link to comment Share on other sites More sharing options...
martinm Posted March 13, 2010 Author Report Share Posted March 13, 2010 A nice little find there Martin.I noticed the Aprillia clutch casing on the picture - would that be from the later water cooled Climbers? Hi Steve No, its from an 89 aircooled TXR (the purple/red one)....it allows you to use one finger on the clutch instead of the two hands required to use the standard set up. Quote Link to comment Share on other sites More sharing options...
t-shock 250 Posted March 13, 2010 Report Share Posted March 13, 2010 88 TXR, the climbers were 89. Quote Link to comment Share on other sites More sharing options...
b40rt Posted March 14, 2010 Report Share Posted March 14, 2010 Hi SteveNo, its from an 89 aircooled TXR (the purple/red one)....it allows you to use one finger on the clutch instead of the two hands required to use the standard set up. Need to get out the dremel and spray can ! Quote Link to comment Share on other sites More sharing options...
virginiatrials Posted March 15, 2010 Report Share Posted March 15, 2010 (edited) Hello Martin, Neat find. The chrome head pipe looks like a TL320 item. It would look great on my Schrieber 320 works replica which is nearly complete. As always, I am interested in buying works parts if you will part with it. Also, is the interior of the mid box on the modified pipe/silencer stock or modified? Does it have the perforated tube inside or has it been gutted and made into a sort of expansion chamber?,Cheers, Jim Edited March 15, 2010 by Virginiatrials Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.