johnh Posted April 17, 2010 Report Share Posted April 17, 2010 I have rebuilt the bike and she fired up 2nd kick but The clutch will not disengage. I have tried putting it into a high gear and rocking and have even ridden it round holding the rear brake but with no success. I have taken the clutch case off and everything seems to be in place. When I pull the lever in there is a fair bit of resistance as though the clutch springs are being compressed. Any ideas will be gratefully received. Cheers John Quote Link to comment Share on other sites More sharing options...
betarick Posted April 17, 2010 Report Share Posted April 17, 2010 remove clutch plates clean steel plates by taking shine and marks off them with emery paper and leave clutch friction plates in oil overnight then bang it all back together with fresh oil & it should be right! Quote Link to comment Share on other sites More sharing options...
johnh Posted April 18, 2010 Author Report Share Posted April 18, 2010 Will give that a go. Cheers John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.