skippy1234 Posted April 27, 2010 Report Share Posted April 27, 2010 cant bleed me @@@@@@ clutch tried the normal way tried back bleeding cant seem to push the fluid backwards am i doing it right 99 techno if you read my posts ive renewed mains crank seals all as a novice put it back together sweet as anything even invented my own fly wheel holding tool but i cant bleed this bleeding clutch please help Quote Link to comment Share on other sites More sharing options...
chewy Posted April 27, 2010 Report Share Posted April 27, 2010 Is it like a gasser where you have to "prime" the slave cylinder first? Quote Link to comment Share on other sites More sharing options...
stork955 Posted April 27, 2010 Report Share Posted April 27, 2010 Gday, does the clutch master cylinder piston return fully to the circlip? If not this will block the port and make back bleeding impossible. It also may be blocked with rubbish inside. Have a good look in this area first. Cheers, Stork Quote Link to comment Share on other sites More sharing options...
skippy1234 Posted April 28, 2010 Author Report Share Posted April 28, 2010 yep piston returns fully and i dont think its blocked as when i pump the lever it squirts a little out of the bleed nipple Quote Link to comment Share on other sites More sharing options...
chewy Posted April 28, 2010 Report Share Posted April 28, 2010 (edited) check fluid is in the slave cylinder bleed nipple is above that (in terms of column of fluid) and that ball brg. is in pushrod assy. Edited April 28, 2010 by chewy Quote Link to comment Share on other sites More sharing options...
skippy1234 Posted April 28, 2010 Author Report Share Posted April 28, 2010 fluid in ball bearing is in i put a steel rod then a bb before irefitted clutch basket Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.