gazzaecowarrior Posted May 8, 2010 Report Share Posted May 8, 2010 How do people cut their grips to fit bar ends ? I've bought some hebo bar ends and would appreciate some advice before I butcher my new renthal grips. Quote Link to comment Share on other sites More sharing options...
shercoman2k8 Posted May 8, 2010 Report Share Posted May 8, 2010 I just drill a hole in the end of the grip, just big enough to fit the bar end in, then tighten up so it pulls against the grip. Dont cut the whole end off, the grip would slide up the bar. Just a hole. Quote Link to comment Share on other sites More sharing options...
richt Posted May 8, 2010 Report Share Posted May 8, 2010 Definately a hole in the end, I used a scalpel. Quote Link to comment Share on other sites More sharing options...
copemech Posted May 9, 2010 Report Share Posted May 9, 2010 Dremel tool with the small sanding drum on. Carefully takes them out without tears to perfect size. Quote Link to comment Share on other sites More sharing options...
mobbster Posted May 9, 2010 Report Share Posted May 9, 2010 Hi Or you could buy the proper renthal grips that are made for bar end stopper's ! ;-) All the best Quote Link to comment Share on other sites More sharing options...
feetdown Posted May 10, 2010 Report Share Posted May 10, 2010 HiOr you could buy the proper renthal grips that are made for bar end stopper's ! ;-) All the best The Renthal Road/Race grips are identical to the Trials grips but already have the holes in the end, they come in 2 lengths 115mm &125mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.