p@ul250 Posted May 24, 2010 Report Share Posted May 24, 2010 Can any one out there help with a photo/description of the order,size of the spacers used on a model 49. I have just purchased a speedo drive replacement spacer from Bultaco UK that seams to be to long. Quote Link to comment Share on other sites More sharing options...
swooshdave Posted May 24, 2010 Report Share Posted May 24, 2010 I thought there was a post about this a while ago. Quote Link to comment Share on other sites More sharing options...
p@ul250 Posted May 24, 2010 Author Report Share Posted May 24, 2010 (edited) Thank you Swooshdave.I found the post(M80 Sherpa T rear wheel and axle) after looking at the photos you posted I can see that the spacer I have is to long as there is no room for the small spacer between the swinging arm and the brake plate.I will turn the big spacer down in the lathe in the morning. Edited May 24, 2010 by paul250 Quote Link to comment Share on other sites More sharing options...
swooshdave Posted May 26, 2010 Report Share Posted May 26, 2010 Shoot, if you have a lathe you could have just turned your own. Quote Link to comment Share on other sites More sharing options...
p@ul250 Posted May 28, 2010 Author Report Share Posted May 28, 2010 It was one of them impulse buys,There I was on the phone ordering other parts for the bike and before I knew it I had asked them to add it to my order. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.