montesamark Posted June 7, 2010 Report Share Posted June 7, 2010 I want to remove the 4rt front spindle and speedo spacer. I have been told that I can replace with a Sherco spindle. Could anyone confirm if this is correct and if so, is there a specific model of spindle that I need to use? Cheers for any help. Quote Link to comment Share on other sites More sharing options...
chrisrt Posted June 8, 2010 Report Share Posted June 8, 2010 You just call. BVM and they will make sure you get the right spindle Christian Quote Link to comment Share on other sites More sharing options...
mark1984 Posted June 8, 2010 Report Share Posted June 8, 2010 if you are trying to get the waight down h&d raceing do titanium spindles front and back and the swing arm spindle too for a 4rt. Quote Link to comment Share on other sites More sharing options...
jsp Posted June 8, 2010 Report Share Posted June 8, 2010 why dont you keep the same spindle but get a spacer that replaces the speedo drive most shops will stock them for about Quote Link to comment Share on other sites More sharing options...
montesamark Posted June 8, 2010 Author Report Share Posted June 8, 2010 Cheers for your replies. I will contact BVM and ask them about spindle and/or spacer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.