bhima Posted June 14, 2010 Report Share Posted June 14, 2010 Notice today that the back brake lever had worn alot by hitting the chain. Is this a common fault? WHAT CAN I DO? Quote Link to comment Share on other sites More sharing options...
betarick Posted June 14, 2010 Report Share Posted June 14, 2010 (edited) I had the same problem. took it off and warmed up and bent it back out of way! but then bent it again. Then the chain wearded it so thin it snapped at the start of a trial. i hadnt even got to 1st section typical luck i have! Edited June 14, 2010 by betarick Quote Link to comment Share on other sites More sharing options...
liviob Posted June 14, 2010 Report Share Posted June 14, 2010 I dont know where you live, but i have one of this guys brake pedals on my Rev3 250 and my 290EVO. Both are very well made and a good buy. http://www.bkceng.com/cycle_products/cycle_index.htm Quote Link to comment Share on other sites More sharing options...
deminimis Posted June 15, 2010 Report Share Posted June 15, 2010 Great link!! Quote Link to comment Share on other sites More sharing options...
neil king Posted June 15, 2010 Report Share Posted June 15, 2010 I just used an adjustable open end wrench to bend mine back in place. Quote Link to comment Share on other sites More sharing options...
bhima Posted June 15, 2010 Author Report Share Posted June 15, 2010 I just used an adjustable open end wrench to bend mine back in place. ill have a closer look! i hope i dont kneed this http://cgi.ebay.co.uk/BETA-EVO-TRIALS-BRAK...=item255ae0b7c0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.