gronno Posted June 17, 2010 Report Share Posted June 17, 2010 I'm thinking about freshening up my 200 pro, it's sounding a little rough now I suspect the mains are getting on a bit, just wondered if anyone here has done a fairly comprehensive rebuild either themselves or a dealer job. I'd be looking at doing rings and little end, mains(not big end hopefully) and the kick start gears + whatever bearings there are in there while it's all apart. Any clues as to expected costs would be appreciated. Quote Link to comment Share on other sites More sharing options...
mikee Posted June 18, 2010 Report Share Posted June 18, 2010 I've done both. first on a 05 pro which i rebuilt myself and second on a 07 pro which i had my local dealer do.... Mains and seals was not a big job, and i found with a little help from here not a bad job. Cost wise with all the parts ran at about Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.