stevenbb4 Posted January 21, 2005 Report Share Posted January 21, 2005 Hello all Pulled the top end of my son's rattley 280 TXT and it's badly worn, going to pop it off to Langcourts next week for a replating. I was having a quick look at the con rod and it has no play up and down but a bit left to right, any body had a crank rebuild? Can it be done at home or do the bearings have to be pressed in, how much are new crank bearings and seals here in the UK. Any info welcome Quote Link to comment Share on other sites More sharing options...
charliechitlins Posted January 22, 2005 Report Share Posted January 22, 2005 The con rod moving side to side on the crankpin is no problem. You are right about the up and down being the thing to look for. You may, though, wand to try to move the entir crank side to side and see if you feel movement. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.