supermotodaz Posted August 2, 2010 Report Share Posted August 2, 2010 Need to do mains on a 2000 290 i just picked up, i,ve undone flywheel nut by holding oposing crankshaft nut but how can i undo this nut, is it only poss with a clutch holding tool or is there another proven method i can use, another question whats the best way to decoke the downpipe, this one,s full of crap, looks like its been ran way to rich. Cheer,s Daz Quote Link to comment Share on other sites More sharing options...
trialsnutterman Posted August 2, 2010 Report Share Posted August 2, 2010 You can't do it with a clutch holding tool, you need to put the flywheel back on and get a flywheel holding tool or buy a impact wrench See Here To decoke your front pipe set it on fire, works a treat but watch you don't get it to hot and discolour it. Quote Link to comment Share on other sites More sharing options...
supermotodaz Posted August 3, 2010 Author Report Share Posted August 3, 2010 You can't do it with a clutch holding tool, you need to put the flywheel back on and get a flywheel holding tool or buy a impact wrench See HereTo decoke your front pipe set it on fire, works a treat but watch you don't get it to hot and discolour it. Cheer, for advice i,ll have a go later today. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.