dickielumpkin Posted August 28, 2010 Report Share Posted August 28, 2010 I'm sure this must have been answered before...but can't seem to find it. I have the rear linkage and swing arm apart on a 2008 125 racing and replaced the 6 needle roller bearings. I have 6 thin washers and can't remember where they go...I can see 4 on the parts list can anyone tell me where the other 2 go?....a picture would be great...many thanks! Andy Quote Link to comment Share on other sites More sharing options...
pumpkin trials Posted August 28, 2010 Report Share Posted August 28, 2010 From memory the 4 thinner ones are either side of the dog bones and between them and the mounts and the thicker 2 are for the main bolt. Best way I found was to do 1 dog bone at a time and then you did not mix them up or get them the wrong way round Quote Link to comment Share on other sites More sharing options...
baldilocks Posted August 28, 2010 Report Share Posted August 28, 2010 the spare two go either side of the lug on the underside of the swinging arm. not sure why they are needed as from memory the inner bush for that bearing is a top hat style bush I think. Quote Link to comment Share on other sites More sharing options...
laser1 Posted August 28, 2010 Report Share Posted August 28, 2010 Here u go - from 2ply on TT. 1 Quote Link to comment Share on other sites More sharing options...
dickielumpkin Posted August 29, 2010 Author Report Share Posted August 29, 2010 Brilliant!....thanks guys Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.