gasgasblue Posted January 29, 2005 Report Share Posted January 29, 2005 Anyone got any tips to stop water getting in my 05 Pro air box Quote Link to comment Share on other sites More sharing options...
mooseman Posted January 29, 2005 Report Share Posted January 29, 2005 All of the above, and steady with that jetwash! Quote Link to comment Share on other sites More sharing options...
luke Posted January 29, 2005 Report Share Posted January 29, 2005 before the above just put the box in the bath or sumthing to fill it, then you will see how crap the seal is! mine did not have any sealent on the back of the box where it needs it most!!!! Quote Link to comment Share on other sites More sharing options...
physco Posted January 30, 2005 Report Share Posted January 30, 2005 put a good quality mudflap on your front mudguard for starter,s.then fit the gas gas uk supplied plastic flap below the radiator.gas gas uk are selling a better under the tank/air box rubber flap.i was recently speaking to their ace mechanic kev hipwell at the test day they did in wales who told me about this.give gas gas uk a ring and ask to speak to andy,kev,s brother who works in the spares department.i have orderd one of the new flaps which i hope i will recieve this week.i also put some tape between the tank and seat,and also tape around the airbox cover after it has been fitted. Quote Link to comment Share on other sites More sharing options...
grib Posted January 31, 2005 Report Share Posted January 31, 2005 On my 03 Pro I took the airbox lid off, put a bead of Loctite silicone around the airbox seal, coated the lid with silicone grease where it touches the seal and replaced the lid. Hasn't leaked since. Also, the teat was missing from the drain hole in my airbox so I glued a rubber flap (made from a piece of inner tube) over the hole, seems to let water out but not in. Quote Link to comment Share on other sites More sharing options...
pa. Posted February 1, 2005 Report Share Posted February 1, 2005 This was found in a Gas Gas Airbox recently... A tiny Beta. Quote Link to comment Share on other sites More sharing options...
t-shock 250 Posted February 1, 2005 Report Share Posted February 1, 2005 Hey! get your own jokes!!!!!!! Or pay me some commission Quote Link to comment Share on other sites More sharing options...
gasgasblue Posted February 1, 2005 Author Report Share Posted February 1, 2005 Thanks for all the advice Quote Link to comment Share on other sites More sharing options...
pa. Posted February 2, 2005 Report Share Posted February 2, 2005 Hey! get your own jokes!!!!!!! Or pay me some commission Didn't say where I ewas going to use it. Quote Link to comment Share on other sites More sharing options...
spokes Posted February 9, 2005 Report Share Posted February 9, 2005 A great substance to use for sealing up crap airboxes is Bonded Car windscreen compound ! ( From a motor factors ) Black stuff that sets as hard rubber. I'll get a brand name off the tube in the shed ! If you get it on your bike where you dont want it use carb cleaner remove it before it goes off ! Dont use it to seal the lid on the air box though ! You'll never get it off again ! If you use silicone sealant, when you spill fuel or spray WD or Carb cleaner on or near it, it will perish and go like jelly thus loosing the seal. Its also good for sealing the rubber cable gromet on the flywheel. Quote Link to comment Share on other sites More sharing options...
mintsauce Posted February 22, 2005 Report Share Posted February 22, 2005 dont go out when its raining, keep out of puddles and dont wash your bike! other people ride bikes called betas we just test them and they put put "gasgas" on the tank. Still best bike ive ever had though despite teething problems Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.