nelly1 Posted September 28, 2010 Report Share Posted September 28, 2010 (edited) hi i have just bought a 94 techno and it sounds rumbly so i want to get all the bearings changed i have got in touch with beta uk for a price and it is 190 for the big end aparently you have to buy the conrod as well does this sound right ? it sounds very expensive to me any tips or advise thanks neil Edited October 1, 2010 by nelly1 Quote Link to comment Share on other sites More sharing options...
stork955 Posted September 28, 2010 Report Share Posted September 28, 2010 Gday, this is correct, the bigend comes as a kit with the rod. This may not need replacement but the only wat to know is checking after stripping down. Can you tell us more about the noise in the engine? Cheers, Stork Quote Link to comment Share on other sites More sharing options...
nelly1 Posted September 28, 2010 Author Report Share Posted September 28, 2010 thanks for the reply there is a slight tapping noise which i am quite sure is top end and a low constant rumble it doesnt change with revs Quote Link to comment Share on other sites More sharing options...
stork955 Posted September 29, 2010 Report Share Posted September 29, 2010 Gday, hard to say without hearing it, but I would say maybe main bearings (on the crankshaft) and the tapping noise is probably piston related. My old 99 Techno had a top end noise that never altered, even after a rebuild. Certainly a strip and some mains cant hurt, measure up the rest while its open.I dont think you will need a rod. Cheers, Stork. Quote Link to comment Share on other sites More sharing options...
nelly1 Posted September 29, 2010 Author Report Share Posted September 29, 2010 hi thanks for the advise mate i will get them ordered up neil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.