wrx_boy Posted September 30, 2010 Report Share Posted September 30, 2010 Hello all. I just picked up a 1997 Fantic Section and about the only thing it needs to make it useable is a new rear fender. I rode it around, through all the gears, and everything seems to function fine. The engine has good compression and it appears to be leak free. The tires are dried and cracked, and the bike is very dirty from lack of care, but it appears to be solid. Is there anything particular to this model I should keep an eye on? I spent quite a while scouring the internet over the last 2 days, but have not found any fenders. Can anyone point me to a source for a new, or decent used, rear fender? Thanks in advance for any help. Matt Quote Link to comment Share on other sites More sharing options...
htrdoug Posted September 30, 2010 Report Share Posted September 30, 2010 Hello all. I just picked up a 1997 Fantic Section and about the only thing it needs to make it useable is a new rear fender. I rode it around, through all the gears, and everything seems to function fine. The engine has good compression and it appears to be leak free. The tires are dried and cracked, and the bike is very dirty from lack of care, but it appears to be solid. Is there anything particular to this model I should keep an eye on? I spent quite a while scouring the internet over the last 2 days, but have not found any fenders. Can anyone point me to a source for a new, or decent used, rear fender? Thanks in advance for any help. Matt Tryalsshop is a good source for Fantic is USA,call Mike,http://www.tryalsshop.com/ You can also call Bob Wright or Bill Pye,Bob Wright Bill Pye Or with some creative hacking you could likely booger a Gasgas rear fender to it... Quote Link to comment Share on other sites More sharing options...
wrx_boy Posted September 30, 2010 Author Report Share Posted September 30, 2010 Or with some creative hacking you could likely booger a Gasgas rear fender to it... Thanks for the reply. I will hit up Mike at the Tryals Shop tomorrow. Funny you mention the Gas Gas fender, as my Gas Gas is sitting only a few feet from the Fantic and I was eyeing the rear fender thinking it just might work... Quote Link to comment Share on other sites More sharing options...
lee harris Posted September 30, 2010 Report Share Posted September 30, 2010 Strip and clean the power valve.i am sure it is seized. You will need new cables also. these mechanisms were new and ignored in their day, evenmoreso now Lee Quote Link to comment Share on other sites More sharing options...
wrx_boy Posted October 1, 2010 Author Report Share Posted October 1, 2010 Strip and clean the power valve.i am sure it is seized. You will need new cables also. these mechanisms were new and ignored in their day, evenmoreso now Lee Thanks for the advice. I assume it is similar in design to the powervalves that were in the Yamaha RZ350 I used to have? And htrdoug, thanks for the call on Mike and the Tryals Shop. He had all the items I was looking for in stock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.