fpete Posted October 2, 2010 Report Share Posted October 2, 2010 Does anyone know where I could get a 22 pilot and 135 main for the Beta 300 with theCV carb? Quote Link to comment Share on other sites More sharing options...
rlracer Posted October 3, 2010 Report Share Posted October 3, 2010 It helps when people list were they are from. In the U.S. try sudco, I loaned a few out and waiting for there return. Quote Link to comment Share on other sites More sharing options...
dgshannon Posted October 3, 2010 Report Share Posted October 3, 2010 Does anyone know where I could get a 22 pilot and 135 main for the Beta 300 with theCV carb? If you go to the Yamaha shop, the stock pilot jet from a 660 Raptor is a 22.5, and is the same carb. Took me FOREVER to source it for mine. Can't speak for the main jet, as I left mine stock. 2-3/8 turns on the fuel screw, with the 22.5 pilot, and stock main, was perfect. - Darrell Quote Link to comment Share on other sites More sharing options...
fpete Posted October 5, 2010 Author Report Share Posted October 5, 2010 If you go to the Yamaha shop, the stock pilot jet from a 660 Raptor is a 22.5, and is the same carb. Took me FOREVER to source it for mine. Can't speak for the main jet, as I left mine stock. 2-3/8 turns on the fuel screw, with the 22.5 pilot, and stock main, was perfect. - Darrell Quote Link to comment Share on other sites More sharing options...
fpete Posted October 5, 2010 Author Report Share Posted October 5, 2010 If you go to the Yamaha shop, the stock pilot jet from a 660 Raptor is a 22.5, and is the same carb. Took me FOREVER to source it for mine. Can't speak for the main jet, as I left mine stock. 2-3/8 turns on the fuel screw, with the 22.5 pilot, and stock main, was perfect. - Darrell Thanks, Where do you have your needle clip? Fpete Quote Link to comment Share on other sites More sharing options...
dgshannon Posted October 6, 2010 Report Share Posted October 6, 2010 Thanks, Where do you have your needle clip? Fpete Needle: 2nd slot down (from the top) with thick washer under clip and thin washer above clip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.